Product Manual

Machine Components (Model 99908, 99909)
24
1. Hose Wrap. The hose wrap provides a storage location for the gun hose.
2. Gun Hose. The gun hose transfers chemical from the pump to the spray gun.
3. Fill Cap. The fill cap has a vent to allow air to enter the tank as the chemical is dispensed.
4. Sprayer Pump. The sprayer pump makes the chemical flow to the spray gun and out the
nozzle.
5. Drain cap. Remove the drain cap to empty the tank. Dispose of or store remaining chemicals
properly as recommended on the chemical label.
6. Spray Gun. Use the spray gun to apply chemical to specific areas. The spray pattern is
adjustable from stream to cone by twisting the spray nozzle (see Operation Instructions). When
the remote switch is in the ON position, the spray gun trigger is the pump ON/OFF control.
Squeeze the trigger and the pump turns on, let go and the pump turns off.
7. Gun Clips. Use the gun clips to store the spot spray gun.
8. Sprayer Tank. The sprayer tank holds the chemical.
9. Pump Power Plug. Connect the remote switch to the sprayer pump at this location. It should
be disconnected when the sprayer is not in use.
10. Remote Switch. The remote switch connects the battery to the pump power plug and allows
the operator to turn the sprayer pump on and off. The remote switch may be left connected to
the battery when the sprayer is not in use.
11. Spray Nozzle. Spraying pattern adjusts from stream to cone.
12. Handles. The handle is used to lift up the sprayer.
13. Suction Strainer. Suction strainer has clear removable bowl for easy cleaning.
14. Regulator. This controls system pressure.
15. Gauge. The gauge is an indicator of the pressure in the system.
16. Boom Vertical Mount. The boom vertical attaches the boom to the tank mounts.
17. Tank Mount. Tank mount is used to mount sprayer tank assembly to vertical mount.
18. Boom Nozzle. Sprays a wide pattern for broadcast application.
19. Boom Nozzle Valve. Boom nozzle valves are located on boom for left/right spray control.
20. Boom Valve. The boom valve shuts off chemical to the broadcast boom.
21. Fill marks. Molded into tank.