Product Manual

Operation – Using the Sprayer (continued)
26
6. Ensure tank
flushed
Ensure tank is flushed of all chemicals from prior uses.
- Chemicals can interact dangerously when mixed, and residue chemicals are
also a health hazard.
7. Check drain
cap
Before filling tank, ensure drain cap is securely tightened.
8. Fill tank
Add pesticide to tank through fill cap:
1. Confirm the chemical/water dilution ratios specified on the chemical
label.
2. Determine chemical and water volumes needed for the planned
application, taking into consideration that maximum tank capacity in
gallons is 10 for 99918, 16 for 99919, 26 for 99920 and 99921.
3. Add chemical to the tank through the fill cap.
If the chemical is not pre-mixed, add water and pesticide concentrate in
the order prescribed on the label.
Note: Only purchase and mix as much chemical as you need for the
planned application in order to minimize chemical over-application
and the need for storing unused chemicals.
9. Ensure
chemical
mixed
Ensure chemical is thoroughly mixed in tank.
- Stirring device should be made of metal or plastic, non-chemical absorbing
material, and then properly cleaned and stored after use.
10. Replace fill
cap
Replace fill cap and tighten securely.
Drain cap
Fig06405
Fig06406