Product Manual

22
Operation – Using the Sprayer
Step Two: Fill the sprayer.
WARNING
ALWAYS wear personal protective equipment as directed on the
chemical label when handling chemicals.
Long pants and sleeves, chemical resistant gloves, and eye protection are
strongly recommended. Additional protective gear may be required.
The motor surface temperature can reach temperatures over 70° C. In
order to avoid scalding, wear gloves during operation of the sprayer.
Fill the sprayer using the following steps:
1. Review safety
information
Review the "Operation – Important Safety Information" related to General
Chemical Safety and Chemical Accident Procedures provided in this manual.
2. Choose safe
mixing/
loading area
Choose a safe chemical mixing and loading area.
- Choose, well-ventilated area away from unprotected people, animals, food, and
other items that might become contaminated.
3. Wear personal
protective
equipment
Wear personal protective equipment as directed on the chemical label.
- Note that additional equipment may be specified for mixing and loading activities.
4. Turn off
sprayer
Turn OFF power to the sprayer before filling.
5. Remove fill
cap
Remove the fill cap located on top of the
sprayer.
Check label on handle to determine if
bleach only or no bleach can be used in
the sprayer.
WARNING
DO NOT mix bleach with other
chemicals – check label on handle
to determine what is to be used
before filling tank.
6. Ensure correct
chemical to
be sprayed
Ensure tank is flushed of all chemicals from prior uses.
- Chemicals can interact dangerously when mixed, and residue chemicals are also a
health hazard.
Figure 4 - FIG06960
Fill Cap