Product Manual

28
Storage
When not in use, store the sprayer indoors. For long term or winter storage, prepare the sprayer by running
RV antifreeze (DO NOT USE automotive antifreeze) through the system. This will keep internal parts
lubricated, protect against corrosion, and keep the unit from freezing.
CAUTION
The sprayer will be damaged if it freezes.
Protect the sprayer from freezing during storage by following the instructions
below.
Prepare for Storage:
1. Flush with
water
Fill the tank with fresh water and run through the system. Operate the spray
gun until the system is completely flushed.
DO NOT add antifreeze before flushing the system as bleach can react
with antifreeze.
2. Add antifreeze
Pour 1 gallon of RV antifreeze (DO NOT USE automotive antifreeze) into
the tank.
Note: RV antifreeze is non-toxic and biodegradable and generally safer for
the environment than automotive antifreeze.
3. Spray briefly
Turn on the pump motor and squeeze the gun trigger briefly until fluid
sprays.
Removing from storage:
1. Drain
Drain the antifreeze left in the tank through the strainer bowl into a suitable
container
2. Flush with
water
Fill the tank with fresh water and run through the system. Operate the spray
gun until the system is completely flushed. Be sure to set up containers to
capture the antifreeze flush water.
DO NOT add bleach back into the sprayer before flushing the system
as bleach can react with antifreeze
3. Disposal
Dispose of the antifreeze and flush water properly.