Product Manual

Operation – Using the Sprayer (continued)
32
Correct
Incorrect
12” Overlap
12” Overlap
NOTE!!
F. Ensure uniform coverage
To ensure proper coverage, overlap the ends of the spray pattern 12”.
Use the tables in Appendix A to determine what speed to drive your vehicle
for the desired application rate.
IMPORTANT: Make sure broadcast nozzle is oriented to spray straight
down before you start. An incorrectly positioned broadcast nozzle may
spray chemicals on you or others.
Broadcast lance and spot spray gun can be used simultaneously. Use the
spot spray gun if you desire to apply pesticide only on selected plants.
Use the broadcast nozzle if you wish to spray large ground areas.
8. Leaving
unattended
If the sprayer must be left unattended at any time:
a) Disconnect power to the sprayer.
b) Relieve system pressure by depressing the gun trigger.
c) Turn off the vehicle. Set brake or block the wheels.
9. Discontinue
use if clogged
or inoperative
If the sprayer becomes clogged or inoperative during use, discontinue
use immediately.
- DO NOT attempt to service while chemicals are in the sprayer and power
is connected.
- Return to service area to review instructions for troubleshooting before
attempting to service.
Note: A reserve, clean container capable of holding at least 16 gallons (Model # 99905) or 26
gallons (Model # 99906) should be kept for use when the sprayer tank needs to be emptied
temporarily for repairs. It is advisable to purchase a reserve tank suitable for pesticide
storage from Northern Tool + Equipment for use in these circumstances. The container
should be properly labeled as to its contents if it is used.