Product Manual

Storage

When not in use, store the sprayer indoors. For long term or winter storage, prepare the sprayer by

running RV antifreeze through the system. This will keep internal parts lubricated, protect against

corrosion, and keep the unit from freezing.

CAUTION

• The sprayer will be damaged if it freezes.

• Protect the sprayer from freezing during storage by following the instructions

below.

Preparing for storage:

1. Add antifreeze

Pour 1/2 gallon of RV antifreeze into the tank.

Note: RV antifreeze is non-toxic and biodegradable and generally safer

for the environment than automotive antifreeze.

2. Spray briefly

Turn on the pump motor and squeeze the gun trigger briefly until fluid

sprays. Store gun in lance clips. If equipped, store broadcast lance in

stored position to prevent damage.

Removing from storage:

1. Drain

Drain the antifreeze left in the tank through the tank drain hole into a

suitable container.

2. Flush with water

Fill the tank with fresh water and run through the system. Operate the

spray gun until the system is completely flushed. Be sure to set up

containers to capture the antifreeze flush water.

3. Disposal

Dispose of the antifreeze and flush water properly.