Product Manual

Installation / Initial Set-Up
19
2. See below for a possible mounting configuration. Note: Guards are
removed to show details.
3. Bolt the generator to the mounting base using three, 1/2” grade 8 bolts. See
below.
Connect
generator to
engine
Connect the generator to the engine using sheaves (pulleys) and V-Belt(s):
1. Select the correct sheaves and belts for this application.
The generator shaft is 7/8” diameter x 1.5” long with a 3/16” keyway. Use
Table 6 below to select the correct sheaves and belts for this application.
Table 6:
Option
Sheaves
Belt(s)
Diameter
Single vs. Double
Type
Quantity
#1
5.8”
Single
Notched V-Belt
1
#2
5.0”
Double
V-Belt
2
Note that a notched V-belt requires only one sheave, while the standard V-
belt requires 2 side-by-side sheaves and 2 V-belts.
Mounting Holes