Product Manual

Assembly and Initial Set-Up

Steps for Assembly / Initial Set-Up

Step 1. Unpacking & Delivery Inspection

Step 2. Gun and Nozzle Storage Set-Up

Step 3. Initial Pump & Engine Preparation

Step 4. Battery Installation

Each of these steps is discussed below:

Step 1. Unpacking & Delivery Inspection

Find and separate the components identified in Figure 2 – Overview of Pressure Washer

Components and Figure 3 – Hardware Bag. Inspect the power washer immediately after you

receive delivery for missing parts and damage.

• If you have missing or damaged components, please contact NorthStar Product Support at

1-800-270-0810.

Figure 2 – Overview of Pressure Washer Components

(2) Spray guns & lances

Pressure washer, tank, and trailer

(2) High pressure

hoses

Manual bag