Product Manual

Machine Components
14
1. Fill Cap: The fill cap is vented to allow air to enter the tank as the chemical is used, but doesn’t allow
chemical to escape the tank.
2. Sprayer Tank: The sprayer tank holds the chemical.
3. Hose Reel: The hose reel is the storage location for the gun hose.
4. Gun Hose: The gun hose transfers the chemical from the sprayer to the spray gun.
5. Pressure Regulator: Turn the pressure regulator until the sprayer is running at the desired pressure.
Do not exceed 350PSI.
6. Pump: The pump produces the chemical flow.
7. Engine: The air-cooled engine powers the pump.
8. Agitation Valve: Open valve for agitation. Close valve to send all flow to the spray gun.
9. Pressure Gauge: The gauge is an indicator of the system pressure
10. Spray Gun: Use the spray gun to apply chemical to specific areas.
11. Gun Clips: Use the gun clips to store the spray gun.
12. Suction Strainer: The strainer prevents debris from entering the pump. It also serves as the tank
drain.
13. Ball Valve: The ball valve allows strainer filter removal without draining the sprayer tank.
14. Agitator: The agitator creates a turbulent flow in the tank and keeps chemicals well mixed.
* 268173 shown