Product Manual

Summary of Important Safety Information
7
Chemical accident procedures
Immediate response is necessary in the event of sprayer leaks, bodily chemical contact, poisoning, or
spills. See instructions below:
Sprayer leak
If the sprayer develops a leak, immediately stop spraying. Turn off power to the sprayer
and follow directions below, as applicable.
Bodily chemical
contact
Personal contamination can occur when chemicals splash, spill, or spray directly
onto a person.
1. Immediately follow First Aid instructions on chemical label.
General procedures can include:
a) Eyes – immediately flush with water.
b) Skin – wash all contaminated skin surfaces with soap and water.
c) Clothing – remove contaminated clothing. Dispose of heavily contaminated
clothing per chemical label instructions.
2. Seek medical advice if instructed on the label or the victim experiences symptoms of
harmful effects. Bring the chemical label for reference.
Poisoning by
ingestion or
inhalation
In case of poisoning from ingestion or inhalation:
If the victim has collapsed or is not breathing, call 911. Otherwise:
1. If you are the victim, immediately seek assistance from nearby personnel because you
may become incapacitated.
2. Immediately follow first aid instructions on chemical label.
3. Call a poison control center for further advice. In the U.S., call 1-800-222-1222. Have
the chemical label available for reference.
Chemical spills
Chemical spills must be quickly contained and properly cleaned up.
Refer to the chemical label for any specific clean-up instructions.
General procedures include:
1. Controlling the spill by stopping the source of the spill.
2. Containing the spill so that it does not spread and get into water sources.
3. Cleaning up the spill immediately.
4. Seeking additional advice from:
- Chemical manufacturer. See chemical label for contact information.
- State pesticide regulatory agency. In the U.S., call the National Pesticide Info. Ctr.
at 800-858-7378 for assistance in contacting your state’s agency.
------------------- DURING STORAGE / TROUBLESHOOTING ------------------
• PREPARE THE SPRAYER FOR STORAGE according to the instructions in this manual.
• SELECT a well-ventilated STORAGE AREA away from sources of heat, flame, or sparks. Gasoline
vapors can ignite and cause a fire.
• READ and FOLLOW the safety rules for troubleshooting / servicing the sprayer to avoid accidental
exposure to chemical and risk of electric shock.