Owner's Manual

33
5. Angle mode
The instrument would enter the Angle Mode automatically after
switched on. You can also enter this Mode by pressing [ANG] under
basic measurement mode. This Mode involves three pages switched
by the key [F4]. Their functions are explained as followed:
Vz:
HR:
Vmode
278°12′23″
159°54′05″
R/L
H-Bz
3/3
3
F4F2 F3
Vz:
HR:
Hset
278°12′23″
159°54′05″
0set
Save
1/3
F1
3
F4F2 F3
Vz:
HR:
V%
278°12′23″
159°54′05″
Rep
Hold
2/3
3
F4F2 F3
[F4]
[F4]
[F4]
F1
F1
5.1 Save
Function: Save the current angle to selected measured file.
● After pressing [F1], whether recorsing after the completion
of measuring point ,the interface of ―Information‖ appears
after pressing [Yes] (if you haven‘t select measured file,
there will be a interface of ―Select file (.MEA)‖ to let you
select file.), which needs you the point name (Pt.N) ,Code
and target height (T.H). The number of ―Pt.N‖ defaults to
added 1. The code is input according to your need, but the
target height according to actual situation. You can press
[ENT] to save data to measured file.
When the compensation value is over, the instrument tips ―Tilt
over!‖, and the angle data can‘t be saved.
● The number of point name in the system is added 1
automatically. If you want to modify point mane, code, and
target height, just press [Num.] or [Alph.], if don‘t just press
[ENT] to save.
● The system saves the record with a prompt ―Finished‖,
which disappears automatically after 0.5 seconds.