Owner's Manual

35
5.5 Angle by repetition
Function: Under right horizontal angle mode, you can measure
angle repeatedly.
1st meas.starts
2nd meas.starts
3rd meas.starts
3rd meas. End(avg. of 3 meas. Is displayed
2nd meas. End(avg. of 3 meas. Is displayed
1st meas.starts( angle between two points is displayed)
A
B
● Enter the interface of angleoby repetition
Count
Ht:
Exit
Oset
Hold
Hm:
HR:
90°00′00″
90°00′00″
[0]
Count: The times of the measurement;
Ht: The sum of angle;
Hm: The average value of angle
● Aim at point ‗A‘, then press [F1] (0 set);
REP-Angle
No Yes
Set 0？
● Press [F4](Yes);
Count
Ht:
Exit
Oset
Hold
Hm:
HR:
00°00′00″
00°00′00″
[ 0]
● Aim at point ‗B‘ by horizontal motion and tangent screw