Owner's Manual

9. Menu

In the basic measurement interface, press [MENU] to enter the

menu interface, then, press [F4] to enter the next page.

1.Surveying

1/2

2.Stake

3.Fileman

4.Program

5.Options

[F4]

1.Adjust

2.Config

3.Select CodeFile

4.Grid scale

5.Communication

On the every page of menu, you can press number key to select.

For example, if you press [1], the first option ―1.Surveying‖ will be

done.

9.1 Surveying

Operation: press [MENU] to enter the first page of menu, then

press [1](Surveying):

Select file(.MEA&.COO)

Num.List

B.S

Enter

File： AAA

[1]

1.Surveying

1/2

2.Stake

3.Fileman

4.Program

5.Options

Press [F4] to enter the interface of ―Surveying‖.

Surveying

1.Station

2.Setup BSS

3.Meas

4.Survey Config

9.1.1 Operation

1) Select file for surveying to save the surveying data;

2) Set station including name, coordinate and instrument

height;

3) Set backsight by measuring backsight or azimuth angle.

4) Set the target height of measured point and start to survey

and save data.