Owner's Manual

mode and coordinate measurement mode is common. You can input

or change the station point or orientation angle.

The two methods of setting station are as followed:

1) Set station by using the data in memory;

2) Input directly by keyboard;

Three methods of the orientation angle of backsight point are

followed:

1) Set backsight point by coordinate in memory;

2) Input the coordinate of backsight point directly;

3) Input the orientation angle directly;

9.1.3.1 Example for set station

The operations of set station by using the data in memory:

1) Enter the interface of ―Set STA‖ with original data

displayed;

Setup STA

STA->

Save

Input

STA

Code:

I.H:

1.000

2) Press the key [F4](STA);

Surveying

Setup STA

Coord.

List

Input

Enter

Pt.n:

3) Press [F1](Input);

Surveying

Setup STA

Num.

B.S

Enter

Pt.n：

4) Input point name, and press [F4];