Owner's Manual

72
Select file(.MEA)
Num.
B.S
Enter
File: 1.MEA
List
After selecting the measured file, press [Enter] or [ENT] to enter
the interface of ―Select format‖. The format of “Sunway” that the
transmission software our instrument equipped can receive and
analysis. But the format of “SSS” means the format of Topcon
(GTS-7), which you can’t use the t transmission software our
instrument equipped to receive. You must use “Topcon link”
software or other can recognize “SSS” format.
Select format
2.SSS
1.Sunway
After selecting the format, enter the interface of exporting, as
shown in the picture below:
Baud:
Slow
Fast
Export
File:
No.:
115200
1.MEA
The operation of key functions, which are [Fast] ,[Slow] you can
refer to the ―import‖. You may be careful that the export file must be
measurement and coordinate, or can‘t be exported.
When exporting file, the computer must receive firstly. The format
of exported file is ―ASCII‖. The instruction of ―Sunway‖ which you
can refer to Appendix B;
9.3.3.2 Export to USB
1) Enter the interface of exporting file to USB, as shown in
picture below: