Owner's Manual

90
Scale factor:the measurement station scale factor
3) Grid scale factor of coordinate
Grid scale factor of coordinate=Altitude factor × Scale
factor
Distance calculation:
1) Grid scale distance(HDg)= HD×Grid scale factor
HD= distance on the ground
2) Distance on the ground(HD)= HDg/Grid scale factor
悬高测量-棱镜点
点名
清空
回退
确认
77°18′33″
169°11′14″
4.351 m
Grid scale
=
Clear
B.S
Enter
Altitude:
Scale:
0.999984
0.000
1.000000
m
After input altitude, you can press [Enter] to calculate the
―Scale‖,as shown in the picture above. Press [ENT] to save
the scale gird and exit this interface. Exceptions: if the scale
value is less than 0.99 or greater than 1.01,it indicates that
the altitude input is error, and you must re-input it. If you
pressing [ESC] , the scale will not saved.
9.10 Communication
If the instrument equipped Bluetooth, select ―5.
Communication‖ on the second page of ―Menu‖;
Press [5] on the second page of ―Menu‖ to enter the interface of
―Communication‖, as shown in the Picture below:
悬高测量-棱镜点
点名
清空
回退
确认
77°18′33″
169°11′14″
4.351 m
Communication
[1. RS232C ]
Exit
Enter
2. Bluetooth
You can set the communication as ―RS232C‖ or ―Bluetooth‖ .
Notice: ―RS232‖ is used for bidirectional communication and
the connector between PC and instrument for import and export.