Owner's Manual

91
10. Roadway
Roadway function is divided into two parts: Design Roadway
and Stake out Roadway. You may stake out designed points
according to the stake and deviation of the Designed Roadway.
Select ―[Menu]→4.Program→[F4](P2)→Select file
(.MEA&.COO) and press [Enter]→1.Roadway‖ to enter the interface
of road menu:
Roadway
1. Open Shape file
1/2
2. Re-define (H)
3. Re-define (V)
4. Resume H curve
5. Resume V curve
P1
Roadway
1. Stake out (road)
2/2
P2
[F4]
If you have already imported [.LS] files into the instrument from
the external, you may open the [.LS] file through ‗1.Open Shape file‘.
You can choose the three opts after opening the LS file: ‗Stake out
(road)‘, ‗Resume H curve‘ or ‗Resume V curve‘.
10.1 Inputting Roadway
The input of road design is divided two parts, one of which is the
input horizontal alignment, and the other is vertical alignment. The
input data will be saved in the selected files, whose maximum
number of element is 21, but the number of intersection cannot be
greater than 20;
10.1.1 Horizontal alignment
The input is for road plane design.
10.1.1.1 Element method
Enter this function through ‗Re-Define (H)‘ and ‗Resume H
curve‘ under Roadway menu.
Selecting ―Re-define(H)‖ to enter the interface of ―Define(H)‖:
Define(H)
SpiralCircle
Line
I.P
Mark： 0.000
Az: 0°00′00″
If you selecting ―I.P‖(intersection piont) for the first time, you
will input by intersection method.
Select a line type, if you don‘t input start point, enter the