Instructions / Assembly

First-Time and Reminding Use Instructions

POURING: Slowly pour fuel into clean burner or burner cup that is COOL TO THE TOUCH. Use a
funnel to fill linear burners. Fill burner or cup no more than 2/3 full. Don’t overfill or allow fuel to
touch anything other than the inside of the burner or cup. Clean any spills towel dry before lighting.
Replace cap on bottle and place bottle 6 feet or more away from the fireplace before lighting. Store
fuel bottles in cool room temperature dry space. Do not store in direct sunlight or allow fuel to
become heated. CAUTION: Spilled alcohol may mar stain flooring or furniture.

LIGHTING: Use long extended lighter to light fuel. CAUTION: The flame starts out slowly. Please
allow 15-20 minutes to reach the optimum temperature and flame height. DO NOT ASSUME THE
FUEL DID NOT IGNITE. Flame might be low and almost invisible, just allow 15 minutes for flame to
reach optimum level. Follow the refilling instructions in this manual.
 BURNING: DO NOT MOVE OR TOUCH FIREPLACE WHEN LIT OR HEAT IS PRESENT. UNIT
WILL BE VERY HOT. It is recommended that the fuel in the burner or burner cup be burned
completely. NEVER LEAVE A BURNING OR HOT FIREPLACE UNATTENDED. KEEP AWAY
FROM CHILDREN AND PETS; THIS IS NOT INTENDED FOR CHILDREN. NEVER ALLOW
CHILDREN TO FILL,LIGHT OR EXTINGUISH A FLAME/FIREPLACE.

EXTINGUISHING: To extinguish the flame, only use the snuffer tool that came with your Northwest
fireplace or use the slider/dampener tool to close the burner. DO NOT ATTEMPT BLOW OUT
FLAME or attempt to extinguish with water. Snuff for 20 seconds or longer. DO NOT ASSUME
FLAME IS OUT BECAUSE YOU CANNOT SEE IT. Repeat process 2-3 times, close and leave for
15 minutes.
IMPORTANT INFORMATION ON FOLLOWING PAGE.
DO NOT USE FIREPLACE UNTIL YOU READ
“RELIGHTING & REFILLING” SECTION
USE INSTRUCTIONS
5