3-Pt. Landscape Rake Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Nortrac™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This 3-Pt. Landscape Rake is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use The NorTrac 3-Pt. Landscape Rake is ideal for grading, leveling, spreading, and removing stones from lawns. It’s designed with a 3-point hitch which fits category 1 pins. Technical Specifications Property #51454 #51455 #51456 207. lbs. 235.0 lbs. 255.0 lbs. Working Width (inches) 48 60 72 Max. HP 45 45 45 Tines (qty.) 24 30 36 Tines per Foot (qty.) 6 6 6 Ship Weight Important Safety Information Read and understand all instructions.
Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your work area. Some of these hazards may be hidden from your view and may cause personal injury and/or property damage if contacted. PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the rake. Do not use the rake while you are tired or under the influence of drugs, alcohol, or medication.
Read and understand the Owner’s Manual before operating, servicing, or repairing the equipment. Stop the engine, remove the key, and set the brake before dismounting the tractor. Operate from the tractor seat only. DO NOT operate without guards in place and in good condition. Never allow riders on equipment. Keep bystanders at least 50 feet away while operating. DO NOT operate or transport on steep inclines. DO NOT exceed this implement’s maximum speed of 5 MPH.
1. Take all the components out from the packing crate. 2. Install the tooth support (part No.15) and tines (part No.16) onto the mounting frame, and then tighten them with M10 x 30 bolt and M10 nut. 3. Assemble the main frame weldment (part No.1) with the mounting frame using a slotted nut and draw pin. 4. Assemble the side bars (lift arms) (part No.7) and braces (part No.3) with the main frame weldment.
Before Each Use Tractor Requirements and Preparation The Landscape Rake fits category 1 hitches. Check the tractor’s 3-point hydraulic lift system. It should operate up and down smoothly and have enough power to lift the rake. Refer to your tractor’s Owner’s Manual or dealer for any adjustments necessary to put the 3-point hydraulic lift system in good working order. Check the tires and rims to make sure they are in good condition. Inflate the tires to the proper recommended air pressure.
Check for ditches, stumps, holes, or other obstacles that could cause the tractor to roll. Be sure tractor tires and rims are in good condition. Inflate tires to proper air pressure. All persons should be at least twenty-five feet (25') away during operation. Clear the area of helpers, bystanders, and especially children. Do NOT allow anyone to stand between the hitch and implement. It is recommended that only tractors with wide front axles use the rake.
Do not lift heavy parts or assemblies. Use a crane jack, block and tackle, forklift, or other mechanical lifting device. Never put hands or any other body part under blocked-up assemblies, if at all possible. After completing assembly, thoroughly inspect the machine to be sure that all nuts, bolts, hydraulics, fittings, or any other fastened assemblies have been thoroughly tightened. Stay alert, watch what you are doing, and use common sense when operating this machine.
5. Store the rake in a clean, dry place. Inside storage will reduce the maintenance and make for a longer rake life. 6. Lay the unit on the ground or ensure that the main frame is stable by using auxiliary supports, such as planted posts, to prevent the possibility of the unit tipping over.
Reference Number Description Quantity 8 Lock Washer 22 2 9 Nut M22x1.5 2 10 Steel Collar 2 11 Slotted Nut M30 1 12 Bolt M16x100 1 13 Hair Pin 2 14 Nut M10 4’: 24, 5’:30, 6’: 36 15 Tooth Support 4’: 4, 5’:5, 6’:6 16 Tooth 4’: 24, 5’:30, 6’: 36 17 Tine bar Weldment 1 18 Bolt M10x30 4’: 24, 5’:30, 6’: 36 Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Nortrac product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
