Product Manual

Page 4 of 11
Intended Use
The NorTrac series tie-rod cylinders are ideal for construction, mining, forestry, demolition, military,
material handling, and other demanding industrial applications.
Technical Specifications
Item#
Model#
Bore
Stroke
(in.)
Shaft
Port
Max.
PSI
66267
T30200609
2”
6”
1.125”
3/8” NPT
3000
66270
T30201209
2”
12”
1.125”
3/8” NPT
3000
66274
T30201009
2”
10”
1.125”
SAE-8
3000
66276
T30201609
2”
16”
1.125”
1/2” NPT
3000
66287
T30201809
2”
18”
1.125”
3/8” NPT
3000
66296
T30203009
2”
30”
1.125”
3/8” NPT
3000
66299
T30202409
2”
24”
1.125”
3/8” NPT
3000
66314
T30200809-LH-ASAE
2”
8”
1.125”
3/8” NPT
3000
66315
T30200809-TH-ASAE
2”
8”
1.125”
SAE-8
3000
Important Safety Information
⚠WARNING
• Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
• The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this tool. Always be
aware of the environment and ensure that the tool is used in a safe and responsible manner.
• Do not allow persons to operate or assemble the product until they have read this manual and
have developed a thorough understanding of how it works.
• Do not modify this product in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the product. There are specific applications for which the product
was designed.
• Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. This
product will be safer and do a better job at the capacity for which it was intended. DO NOT use
this equipment for a purpose for which it was not intended.
• Industrial or commercial applications must follow OSHA requirements.
⚠WARNING
WORK AREA SAFETY
• Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit.
Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas
may put you dangerously close to cutting tools and rotating parts.