Product Manual A

Snowblower Setup Instructions

1. Uncrate items and compare with the parts breakdown found in the Operator’s Manual

2. Bolt on left and right skid shoes

according to ‘Image 1’.

3. Assemble the chute. Following manner of assembly in ‘Image 2’ and ‘Image 3’. Refer to the

snowblower diagram in the operator’s manual for exploded view.

Note: Shims (#34 in parts list) for bearings

must be installed on the top and bottom of

bearings.

The bolts must be oriented with the threads

down, see ‘Image 4’.

Image 1: Assembled Skid Shoes

Image 3: Chute Assembly

Image 2: Chute Assembly

Image 4: Chute Bearings

PAGE 1
Snowblower Setup Instructions 1. Uncrate items and compare with the parts breakdown found in the Operator’s Manual 2. Bolt on left and right skid shoes according to ‘Image 1’. Image 1: Assembled Skid Shoes 3. Assemble the chute. Following manner of assembly in ‘Image 2’ and ‘Image 3’. Refer to the snowblower diagram in the operator’s manual for exploded view. Image 2: Chute Assembly Image 3: Chute Assembly Note: Shims (#34 in parts list) for bearings must be installed on the top and bottom of bearings.
PAGE 2
Note: Hand crank support bracket must be installed on the bottom of chute flange. 4. Assemble hitch. The tabs the join the A frame must be placed inside the frame. See ‘Image 6’. Image 5: Crank Support Bracket Image 6: Hitch Frame 5. Assemble the hitch top assembly and chute crank support bracket as shown in ‘Image 7’. The bracket should have a 90 degree bend allowing the crank to freely turn. Image 7: A Frame Top Assembly 6. Leave bolts and nuts finger tightened during hitch assembly.