User guide

SERIES
600 SERIES600
NOSHOK
PRESSURE
SWITCHES
PROGRAM MODULE
INSTRUCTIONS
1. With the PC off, connect the RS232 programming cable
to both the PC and the programming module.
2. Connect the programming module to a 12-30 VDC
power supply in accordance with the catalog wiring
diagram and connect the module to the Smart
Switch 5 pin M12x1 connection.
3. Turn on the PC, insert the software diskette and
follow the prompts on the screen.
4. To adjust the switch function(s), set point(s) and
hysteresis simply click on the appropriate tool
bars, insert your requirements and
close the program.
Power Supply
Programming Module
You now have a fully programmed,
completely tamper-proof digital
pressure switch ready for installation.
Connection table for 5 PIN M12x1 connector
Series 600 Smart Switch switching points are nor-
mally set by NOSHOK per customer requirement. A
programming module (hardware) and software is
available from NOSHOK to allow setting or changing
switch points by the customer.
3
5
4
21
power
supply
output
5
3
5
4
21
power
supply
output
34
21
power
supply
S1 output
S2 output
brown
black
blue
brown
black
blue
brown
black
blue
grey
brown
black
blue
grey
5
34
21
power
supply
S1 output
S2 output
3
5
4
21
power
supply
output
5
3
5
4
21
power
supply
output
34
21
power
supply
S1 output
S2 output
brown
black
blue
brown
black
blue
brown
black
blue
grey
brown
black
blue
grey
5
34
21
power
supply
S1 output
S2 output
3
5
4
21
power
supply
output
5
3
5
4
21
power
supply
output
34
21
power
supply
S1 output
S2 output
brown
black
blue
brown
black
blue
brown
black
blue
grey
brown
black
blue
grey
5
34
21
power
supply
S1 output
S2 output
3
5
4
21
power
supply
output
5
3
5
4
21
power
supply
output
34
21
power
supply
S1 output
S2 output
brown
black
blue
brown
black
blue
brown
black
blue
grey
brown
black
blue
grey
5
34
21
power
supply
S1 output
S2 output
1 switching output
P-switching
2 switching outputs
P-switching
N-switching
N-switching
Supply
10...30 VDC
Customer
equipment
NOSHOK
pressure switch
Supply
10...30 VDC
Customer
equipment
NOSHOK
pressure switch
Load
Load
•
•
•
•
•
•
Supply
10...30 VDC
Customer
equipment
NOSHOK
pressure switch
Supply
10...30 VDC
Customer
equipment
NOSHOK
pressure switch
Load
Load
•
•
•
•
•
•
P-switching output
N-switching output
SWITCHING OUTPUT SCHEMATIC
SERIES
500
SERIES
600
&
CORPORATE HEADQUARTERS
1010 West Bagley Road • Berea, Ohio 44017
440-243-0888 • FAX [phone]
E-MAIL: [e-mail] • WEB: www.noshok.com
PSWD 10-3
Function
Connector
M12x1
Power supply: + 1 Brown
Power supply: – 3 Blue
Switching output: S1 4 Black
Switching output: S2 5 Grey