Owner's manual

Operating manual
5301 Series Load Pins
10
Technical data
)3-LIS( 1035 ledoM
Nominal force F
nom
5 / 10 / 20 / 30 / 50 / 100 / 200 kN 5 / 10 / 20 /
30 / 50 kN
Force limit
150 % F
nom
Breaking limit
> 300 % F
nom
Accuracy
< 2 % of F.S. and < 0,5 % of F.S. < 0,5 % of F.S.
Relative backlash width (Hysteresis)
< 0,5 % of F.S. and <0,2 % of F.S. < 0,5 % of F.S.
Creeping, 30 min. at F
nom
0,1 % of F.S.
Nominal temperature range -4 ... 176 °F (-20 … 80 °C)
Storage temperature -40 ... 212 °F (-40 … 100 °C)
Temperature influence - Meas.range
- Null signal
0,1 % / 10K
0,1 % / 10K
Transverse force action
(signal at 100% nominal load under 90°)
< 5 %
Vibration resistance 20g, 100h, 50...150Hz acc. to DIN EN 60068-2-6
925 CEI / 925 06 NE ot .cca 76 PI ssalc noitcetorP
Interfering emission acc. to EN 61326
Interference immunity acc. to 61326
Electrical protection class Reverse polarity, overvoltage and short circuit protection
Analogue outputs
Output signal
4 … 20 mA – 2-wire or
0 … 10 VDC – 3-wire
4 … 16 mA - 2-L
0 … 7 V - 3-L
Power consumption
Current output: 4 … 20 mA: Signal current
Voltage output:: ca. 8 mA
Auxiliary power
10 ... 30 VDC for output 4...20 mA
14 ... 30 VDC for output 0 ... 10 V
Burden
≤ (UB–10 V)/0,02 A for output 4...20 mA
> 10 kOhm for output 0 ... 10 V
).S.F fo % 09 ot pu % 01 nihtiw( sm 1 ≤ emit gnitsujdA
Electrical connection Round connector M12x1, 4-pin 5-pin
NOSHOK, Inc. • 1010 West Bagley Road, Berea, OH 44017 • Ph: 440.243.0888 • Fax [phone] • www.noshok.com
1035
CANOpen
Output signal
CANopen protocol in acc.with CiA DS-301
V.402,
Device profile DS-404 V. 1.2
Reproducibility
≤ ± 0.05 % of setting
Stability per year
≤ ± 0.2 % of setting under reference conditions
Electrical connection Round connector M12 x 1 - 5-pin.
Auxiliary power 10 ... 30 VDC
)W7.0< noitarapes cinavlag htiw( W5.0 < noitpmusnoc rewoP
Communication services
LSS (CiA DSP 305, Version 1.1.1) Services
Configuration of device address and baud rate
Sync/Async, Node/Lifeguarding, Heartbeat
Filters
Individually programmable filters for specific
removal of resonance frequencies, for example
Adjustment
Zero point and measuring range ±10% by
making entries in object directory
Adjustment time
1.5 ms (baud rate ≥ 125K) within
10 % up to 90 % of setting.
Measuring frequency Internal 1000 Hz (adjustable up to approx. 4 Hz)
Measuring element made from stainless steel