Owner's manual

4.4 Electrical Connection

The supply voltage is between 12 and 36 V DC (12 and 30 V for intrinsic safety de-

vices). The power supply and the output signal are conducted across a two-wire cable

(max. 12 mm outer diameter, max. 14 AWG) and connected in accordance with the

pin configuration.

Auxiliary power can be supplied by a power unit, a transmitter power supply or by

means of a PLC connection.

It is suggested to use a design with integrated lightning protection for preventing

damage due to voltage spikes.

Please observe local installation regulations (Germany: VDE-Standard).

The terminal voltage should not exceed 36 V.

Attention