Owner's manual

4
2.3 Installation Examples
The Digitrans is primarily used to detect the pressure in pipes, plants and tanks.
The pressure is measured using absolute (against a vacuum) or relative (against
external or air pressure) measurement depending on the type of sensor selected.
The Digitrans is also used for hydrostatic pressure measurement of liquids in tanks.
Process Pressure Measurement: Process Pressure Measurement:
Used to measure pressure of liquids Used to measure container press
ure.
or gases in pipelines.
Process Pressure Measurement: Process Pressure Measurement:
Installed behind feed pumps for Installed in front of and behind the filter.
process control or monitoring pump Uses the pressure differential for moni-
trid fo noitalumucca ro noitcnuf eht gnirot.snoitcnuf
in the filter. Both output signals are pro-
cessed by a PLC or signal converter.