Manual

Parameter description / programming
With two switching outputs
Temperature units
Degree Celsius
Degree Fahrenheit
Switch 1, Set Point Select set point for rst switch
Switch 1, Reset Point Select reset point for rst switch
Contact 1 Select contact function for rst switch
normally open Select normally open contact
normally closed Select normally closed contact
Switch 2, Set Point Select set point for second switch
Switch 2, Reset Point Select reset point for second switch
Contact 2 Select contact function for second switch
normally open Select normally open contact
normally closed Select normally closed contact
Store
The previous changes are only accepted if button 2 is
pressed about 15 seconds after the previous button press!
1) The pressure units setting applies immediately for the switching point settings, the reset points
and for the process pressure 4-digit LED display.
5