T H E SLU S H EAS E ™ HSM Series Nostalgia Products Group LLC 1471 Partnership Dr. Green Bay, WI 54304-5685 Visit Us Online at www.nostalgiaelectrics.com ©2009 Nostalgia Products Group LLC Rev.
14 13 RETURNS & WARRANTY Read These Instructions Before Using This Unit! Save These Instructions SHOULD YOUR UNIT NOT WORK OR IS DAMAGED WHEN YOU FIRST TAKE IT OUT OF THE BOX, PLEASE RETURN IT TO THE PLACE OF PURCHASE IMMEDIATELY. Should you have any questions, please contact us via email or at the customer service number listed below between the hours of 8:00 AM and 5:00 PM, Monday through Friday, Central Standard Time. Distributed by: Nostalgia Products Group LLC 1471 Partnership Dr.
1 2 IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: IMPORTANT SAFEGUARDS (Continued) 11. DO NOT place on or near a hot gas or electric burner or in a heated oven. 12. Extreme caution must be used when moving this appliance. 1. Read all instructions before operating this appliance. 2. DO NOT OPEN THE UNIT LID while unit is running. 3. Do not place hands or fingers inside fill plug hole while unit is running. 13.
3 IMPORTANT PRECAUTIONS A. NEVER immerse the main base unit in water. B. NEVER operate near water or hot temperatures. C. NEVER leave unattended while in use. D. NEVER try to force the locking mechanisms. E. Unplug unit from power outlet source when not in use and when cleaning. F. DO NOT put in dishwasher, microwave or oven. G. DO NOT operate this appliance with a damaged cord or plug or in the event the appliance ever malfunctions. H. Keep out of the reach of children. I.
6 It is recommended that after unpacking your Home Slush-Ease™ Machine, you take the unit apart and clean all parts, to remove any packing debris. 4. Pull the 2 white end plugs (front and back) out to release the aluminum/auger mixing mechanism from mixing chamber. (See Illustration) NOTE: DO NOT attempt to remove plugs completely from unit. BEFORE FIRST USE 1. First remove blue mixing chamber by unlocking it from the motor base. (See Below) End Plug 5.
7 7. Remove the aluminum cylinder from the plastic auger cage and lift off the cap on the aluminum cylinder. (You may need to use the cap opener located on the back of the unit under the motor.) 8 7. You may need to rotate the cylinder cage slightly to enable the cylinder cage to drop down into the mixing chamber. 8. Now parts are all ready to wash in warm soapy water, towel dry. 8. Push both front and back end plugs into cylinder cage, to lock into mixing chamber. USING YOUR HOME SLUSHEASE MACHINE™ 1.
10 9 USING YOUR HOME SLUSHEASE™ MACHINE Continued 12. Place the unit on a level counter top. Attach the cup holder by snapping into place Illustration A. Make sure the dispenser handle is in the UP position as shown below, in Illustration B. Then plug unit into the electrical cord provided as shown in Illustration C. SUGGESTIONS AND RECIPES Your Home Slush-Ease™ Machine will give you many opportunities to experiment and be creative with a variety of liquids.
12 11 HELPFUL TIPS When inserting the ice cylinder into the cylinder cage unit, try laying it on its side and slide it in. The fit is tight and this may avoid pinching fingers or catching jewelry. CLEANING 1. Make sure the unit is unplugged before cleaning. 2. Carefully disassemble your Home Slush-Ease™. The following parts can be submerged in water: Lid and fill plug The mixing chamber with pour spout Ice Cylinder and cap Cage and lid 3.
