Use and Care Manual

ENGLISH

INSTALLING THE CASTERS

Follow the steps below to install the Casters.

1. Empty the inside of the cabinet completely

and lay the KEGORATOR™ down on it’s side.

We recommend that you place a piece

of cardboard or cloth underneath the

cabinet to prevent dents or scratches.

2. Place washers over Caster bolts, then

insert the Casters into the holes on the

bottom corners of the cabinet. Tighten

each Caster by turning the nut clockwise

with a wrench (not provided in the kit).

3. Once all four Casters have been tightened,

stand the cabinet in its upright position.

Note: Two of the Casters include locking mechanisms to ensure the unit does

not slide on hard oors. These two locking Casters should be fastened at the

front end of the unit, with the unlocked Casters fasted on the rear end.

INSTALLING THE GUARDRAIL

Follow the steps below to install the Guardrail.

1. Place the Guardrail on top of the KEGORATOR™.

2. Align all holes of the Guardrail with the

holes on the top of the KEGORATOR™.

3. Secure the Guardrail to the KEGORATOR™ by

placing inside corresponding rubber holes.

Beer

Dispenser

Tower

Beer Duct

Guard Rail

Handle