Installation Guide

ManualsBrandsNostalgic Warehouse ManualsDoor HardwareRope Rosette 2-3/8 in. Backset Bright Chrome Privacy Bed/Bath White Porcelain Door Knob

1

2

3

MEASURE FROM THE FLOOR TO THE CENTER

OF EXISTING LOCKS, AND USE THIS DISTANCE

AS THE CENTER OF THE DUMMY MOUNT. IF THERE

ARE NO EXISTING LOCKS, POSITION THE DUMMY

MOUNT 36” TO 38” FROM THE FLOOR.

2 FOLD TEMPLATE ALONG DOTTED LINE,

AND POSITION FOLD ON THE EDGE OF THE DOOR.

TAPE TEMPLATE TO FACE OF DOOR.

3 BEFORE DRILLING VERIFY THE

BACKSET OF YOUR EXISTING DOORS

IN YOUR HOUSE. DRILL PILOT HOLES

USING A 7/64” DIAMETER BIT.

4 INSERT THREE WOOD SCREWS,

SLIDE ROSETTE OVER MOUNT,

AND SCREWON KNOB.

5 INSERT HEX SCREWS

AND TIGHTEN.

FLOOR

DUMMY MOUNT

(1)

TEMPLATE

EDGE OF DOOR

FACE OF DOOR

Page 4 - PK177 04202017