Instructions / Assembly

PK108 10052016
Mortise Lock
Handing Instructions
Remove cam (3).
bolt assembly
cam
(1)
(3)
left hand lock shown
Flip bolt assembly over so it is opposite
its original orientation, and insert into
mortise lock.
Insert the cam on top of the bolt
assembly for RH locks.
flipped bolt assembly
right hand lock shown
Put bolt spring (2) back in its original
position. This will push the
bolt assembly (1) out.
Make certain noted springs are in the
correct location.
Rotate the cam (3) with the spindle
(attached to a knob) to test operation.
Replace the cover, and attach with screw.
bolt spring
cam
springs
(2)
(3)
right hand lock shown
Page 3