Installation Guide

B
For 2-3/8” Backset
3-1/2”
2-3/8”
3-3/4”
2-3/4”
Cross Bore
Hole -
2-1/8”
Diameter
For 2-3/4” Backset
Door Thickness
Centerline
Edge Bore
Hole - 1”
Diameter
Faceplate
Mortise Area
#
10
G
#11
#13
#3
#12
Door
Stop
Door
Jamb
Install Jamb
Strike Plate
F
Inside
of Door
Thumbturn
Assembly
5/8”
Machine Screws
(Part #
9)
Attach
Thumbturn
Assembly
with Included
Screws.
Door Inside
E
Outside Assembly (Part #’s 4, 5A & 5B )
Deadbolt
Adaptor Plate
(Part #
6)
2-3/8”
Machine Screws
(Part #
7)
2) Attach Deadbolt Adapter
Plate With Included Screws
1) Place Outside
Assembly on
Door Outside
Door Outside
D
Tailpiece must be
VERTICAL during
installation.
!
#4
#5A
#5B
Install
Cylinder
Into
Outside
Plate
Deadbolt Tongue must
be EXTENDED during
installation.
C
Deadbolt Latch
!
Edge Bore
Hole
Deadbolt Latch Tongue Note
B
For 2-3/8” Backset
3-1/2”
2-3/8”
3-3/4”
2-3/4”
Cross Bore
Hole -
2-1/8”
Diameter
For 2-3/4” Backset
Door Thickness
1-3/4” to 2”
Centerline
Edge Bore
Hole - 1”
Diameter
Faceplate
Mortise Area
A
Face of Door
Edge
of
Door
Centerline
USE INCLUDED PREPARATION
TEMPLATE FOR NON-PREPPED DOORS
Door Hardware
Installation Instructions
Updated July 2015
Page 1 – PK133 11222017
Single Cylinder Deadbolt
For assistance call
1-800-522-7336 Monday - Friday, 7 am—5pm Mountain Time
or visit www.NostalgicWarehouse.com/support