Installation Guide

A A B
B
Push plastic template’s large circles (A) into existing bore holes of door. Use position of bottom hole (B) to mark and drill 1/4 inch bottom grip mounting hole.
1. 2.
20
22
19
17
13A
14
24
23
9
10
12
16
15
14
1
3A
4
5
6
8
7
21
3C
3B
1A
13
18
11
2
1. Deadbolt Latch
1A. Latch Tongue
2. 3/4″ Faceplate & Strike Wood Screws (8) 3. Cylinder Assembly (W/Keys)
3A. Cylinder Body 3B. Tailpiece 3C. Spin Ring
4. Plate 5. Deadbolt Adapter Plate
6.
2-3/8” Machine Screws (2) for 1-3/4” thick doors. 2-1/4” Machine Screws (2) for 2” thick doors.
7.
Thumbturn Assembly
8.
5/8″ Thumbturn Machine Screws (2)
9.
Dustbox for Deadbolt
10
Door Frame Reinforcer
11.
3″ Reinforcer Wood Screws (2)
12.
Strike Plate for Deadbolt
13.
Handleset Latch
13A.
Latch Tongue
14.
Latch Faceplate
15.
Handleset Spindle
16.
Exterior Handleset
17.
Long Plate
18.
1″ Oval Head Wood Screws (4)
19.
Lever
20.
Screw Cover Adapter
21.
2-1/2″ Bottom Grip Mounting Screw for 1-3/4” thick doors. 2-3/4” for 2” thick doors.
22.
Mounting Screw Cover
23.
Dustbox for Handleset
24.
Strike Plate for Handleset
}
3
Cross-Bore
Holes
Edge-Bore
Holes
Part
Number
Part
Description
15
Exploded Drawing Single Cylinder Handleset
Long Plate With Pre-Attached Lever
DOOR INTERIOR DOOR EXTERIOR
silver
gold
DIAMOND
ORIENTATION
SQUARE
ORIENTATION
Silver end of spindle must be in “Diamond” orientation while initially inserting into latch.
Once silver end of spindle is inserted, the gold end should be rotated to “Square” orientation before the spindle is completely inserted.
For assistance call 800-522-7336 Monday through Friday 7am to 6pm Mountain Time
PK #303 08012019