Specification

For 2-3/8”
Backset:
For 2-3/4”
Backset:
Backset
Information
NOTE:
DRILLING
TEMPLATES ON
SEPARATE
INCLUDED
SHEET
B
Install Latch
Install latch and rotate
the latch tongue
to change handing.
(See page 1 for handing)
Install faceplate with
3/4” wood screws.
1
2
Door - Outside
See Latch Tongue
Note in next panel
*
*
*
Latch Tongue Note
Bevel Side
Face Plate Curve
Strike Plate Curve
Bevel side of latch tongue should
contact curved end of face plate,
and curved end of strike plate.
Insert Spindle
Privacy
Install Exterior
Rosette/Plate
Install Bushing & Knob
3
3
3
Tighten Hex Screws
Insert both hex screws
and tighten
3
3
Install Interior
Rosette/Plate,
Bushing
and Screws
Install Knob
Insert both hex screws
and tighten
J
NOTE:
If knobs do not turn freely;
loosen one knob and rotate
counter clockwise for
1/4 turn, then retighten
the hex screws.
Repeat if necessary.
Installation Instructions
For Restoration
Rosettes and Short Plates
Passage/Privacy
Fits doors
1-3/8” to 1-3/4” thick
Tighten
Hex Screws
Need help? Please Call us at
1-800-522-7336
Monday–Friday
7am–5pm Mountain Time
or visit
www.NostalgicWarehouse.com/support
Page 3 - PK107R 04262017