User's Manual

13
FIRMWARE UPDATE
The console supports OTA rmware update capability. Its rmware may be updated over the air
anytime (whenever necessary) through any web-browser on a PC with WI-FI connectivity. Update
function, however, is not available through mobile/smart devices.
Upload
Browse
Firmware version: 1.00
Current rmware
version
Bottom of web interface ADVANCED page
Press to start upload the rmware
to console
Please to select the rmware le for
update
FIRMWARE UPDATE STEP
1. Download the latest version rmware to your PC.
2. Set the Console into AP (access point) mode then connect the PC to the console (ref to
"SETUP WI-FI CONNECTION" section in previous page).
3. Click the
Browse
in rmware update section and browse the location of the le you
download in step 1. To update the WI-FI rmware, click the
Browse
in WI-FI rmware
section.
4. Click the corresponding
Upload
to start transfer the rmware le to console.
5. In the meantime, the console will execute the update
automatically and will show the update progress on display (i.e.
100 is completion).
The update time is around 5 ~ 8 minutes
6. The console will restart once the update is completed.
7. The console will stay in AP mode for you to check the rmware version and all the current
setting.
IMPORTANT NOTE:
- Please keep connecting the power during the rmware update process.
- Please make sure your PC's WI-FI connection is stable.
- When the update process start, do not operate the PC and console until the update nished.
- During rmware update the console will stop upload data to the cloud server. It will reconnect to
your WI-FI router and upload the data again once the rmware update succeed. If the console
cannot connect to your router, please enter the SETUP page to setup again.
- After the rmware updates, user might need to input the Weather Underground ID and
password again.
- Firmware update process have potectial risk, which cannot guarantee 100% success. If the
update fail, please redo the above step to update again.
OTHER SETTING & FUNCTIONS OF THE CONSOLE
MANUAL CLOCK SETTING
This console is designed to obtain the UTC time by synchronize with the assigned internet time
server. If you want to use it ofine, you can set the time and date manually. During the rst time
startup, press and hold the [ SENSOR / WI-FI ] key for 6 seconds and let the console back to
normal mode.
1. In normal mode, press and hold [ CLOCK SET ] key for 2 seconds to enter setting.
2. The setting sequence: DST AUTO/OFF Hour Minute second 12/24 hour format
Year Month Day M-D/D-M format Time sync ON/OFF weekday Language.
3. Press [ ] or [ ] key to change the value. Press and hold the key for quick-adjust.
4. Press [ CLOCK SET ] key to save and exit the setting mode, or the unit will automatically exit
the setting mode 60 seconds later without pressing any key.