Captuvo SL22/42 ChargeBase Quick Start Guide CAPTUVO22-42-CB-QS Rev A 7/13
Overview The ChargeBase is a 4-slot charging cradle that can power four sleds and charge their batteries in four hours. If the Apple® iPod touch® / Apple iPhone is inserted into the sled, the iPod touch / iPhone will also be charged. ! We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty.
Front Panel Back Panel Power Supply Connector Sled Wells (Qty.
Power The terminal requires 12 Volts DC input for battery charging; the power adapter on the power cable converts the voltage from the power source to 12 volts DC. Use only a UL Listed power supply, which has been qualified by Honeywell with output rated at 12VDC and 5A amps with the device. Honeywell recommends that you leave the ChargeBase connected to its power source at all times, so that it is always ready to use.
Connecting Power to the ChargeBase 1. Plug the A/C power cord into the power adapter. 2. Plug the power connector cable into the power connector on the back panel of the ChargeBase. 3. Plug the A/C power cord into a standard wall outlet. The ChargeBase is ready to begin charging the sled/iPod touch.
Charging the Battery 1. Install the main battery pack in the terminal. 2. Verify the ChargeBase has power. 3. Slide the sled into one of the four wells. Charging begins immediately if required by the sled or the iPod touch. If the iPod touch is installed in the sled, the battery icon at the top of the screen indicates that it is charging. The sled and the iPod touch charge simultaneously and completely depleted batteries will be charged in four hours.
Agency Information USA FCC Part 15 Subpart B Class B This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules.
If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet helpful: “Something About Interference.” This is available at FCC local regional offices. Honeywell is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by Honeywell.
1. Cet appareil ne doit pas causer de brouillage préjudiciable. 2. Cet appareil doit pouvoir accepter tout brouillage reçu, y compris le brouillage pouvant causer un fonctionnement indésirable.
Europe The CE marking indicates compliance to 2004/108/EC EMC Directive with Standards EN55022 CLASS B, EN55024, EN61000-3-2, EN61000-3-3. 2011/65/EU ROHS (Recast). In addition, complies to 2006/95/EC Low Voltage Directive, when shipped with recommended power supply. For further information please contact: Hand Held Products Europe B.V. Nijverheidsweg 9-13 5627 BT Eindhoven The Netherlands Honeywell International Inc. shall not be liable for use of our product with equipment (i.e.
Hand Held Products Europe B.V. Nijverheidsweg 9-13 5627 BT Eindhoven Pays-Bas Honeywell ne peut pas être tenu responsable des éventuelles conséquences de l'utilisation de ses produits avec des équipements (modules d'alimentation, ordinateurs personnels, etc.) ne comportant pas la marque CE et non conformes à la Directive sur les basses tensions. La marcatura CE indica conformità ai sensi della direttiva EMC 2004/108/EC con gli standard N55022 Classe B, EN55024, EN61000-3-2, EN61000-3-3.
Directiva 2006/95/EC sobre el material eléctrico destinado a utilizarse con determinados límites de tensión, cuando se envía con una fuente de alimentación recomendada. Para obtener información adicional, póngase en contacto con: Hand Held Products Europe B.V. Nijverheidsweg 9-13 5627 BT Eindhoven Países Bajos Honeywell no será responsable del uso de sus productos con equipos (p. ej., fuentes de alimentación, ordenadores personales, etc.
Honeywell não se responsabiliza pelo uso de nossos produtos com equipamentos (fontes de alimentação, computadores pessoais, etc.) que não estejam marcados com CE e em conformidade com a Diretriz de Baixa Voltagem. CE 表示设备符合 2004/108/EC EMC 指令和 EN55022 B 类、 EN55024、 EN61000-3-2、 EN61000-3-3 2011/65/EU ROHS (Recast). 的标准要求。此外，在随附建议的电源时，设备还符合 2006/95/EC 低电压指令的要求。有关其他信息，请联系： Hand Held Products Europe B.V.
CE マ ー キ ン グ がな く 、 Low Voltage Directive に適合 し ない機器 ( 電源装置、 パー ソ ナ ル コ ン ピ ュ ー タ など ) と と も に当社の製品を使用 し た場合、 Honeywell は一切の責任 を負いません。 CE 표시는 2004/108/EC EMC Directive의 표준 EN55022 CLASS B, EN55024, EN61000-3-2, EN61000-3-3. 2011/65/EU ROHS (Recast). 을 준수함을 의 미합니다 . 또한 , 권장되는 전원 공급장치와 함께 제공되는 경우에는 2006/95/ EC Low Voltage Directive 를 준수함을 의미합니다 . 자세한 내용은 다음으로 문 의하시기 바랍니다 . Hand Held Products Europe B.V.
Honeywell Scanning & Mobility Product Environmental Information Refer to www.honeywellaidc.com/environmental for the RoHS / REACH / WEEE information. Technical Assistance Contact information for technical support, product service, and repair can be found at www.honeywellaidc.com. User Documentation To download the CAPTUVO SL22/42 sled documentation, go to www.honeywellaidc.com. Limited Warranty Refer to www.honeywellaidc.com/warranty_information for your product’s warranty information.
有毒有害物质名称及含量的标识格式 (Names and Content of Hazardous Substances or Elements) 部件名称 (Parts Name) 有毒有害物质或元素 (Toxic and Hazardous Substances or Elements) 铅 (Pb) 汞 (Hg) 镉 (Cd) 六价铬 (Cr6+) 多溴联苯 (PBB) 多溴二苯 醚 (PBDE) 印刷电路板 (PCB) o o o o o o 配重块 (Weight x o o o o o 充电器 (Adapter) x o o o o o 外壳 (Housing) o o o o o o 电源线 (Power Cord) x o o o o o o: 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下 (Indicates that this toxic or hazardous substance contained in all of the homogene
Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII.
