User Manual

7
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Installation
Attach the Casters (B)
1. Flip the Base (A) upside down and place it onto a clean and
at surface. (Figure 1)
Note: Cover hard oors with a soft cloth to prevent
scratching.
2. Insert each of the four Casters (B) into the holes, located in
the bottom of the Base (A) and tighten, using the Wrench
(C1).
3. Flip the Base (A) upright so the Casters (B) are making
contact with the oor.
4. (For uneven surfaces) Flip the Base (A) upside down and use
the Wrench (C1) to adjust the Nut located on each Caster
(B).
Figure 1
Casters (B)
Wrench (C1)
Nut