User Manual
11
Assemble the Universal Plates (C)
1. Place the Universal Plates (C) next to one another on a
clean and at surface with the Plastic End Caps facing the
outer edges and the Screw Holes facing down. (Figure 6)
2. Slide one Connector (J) into each Universal Plate (C).
Note: Both Connectors (J) must be oriented the same way.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Figure 5
M6 x 25 mm
Screw (S)
Figure 6
Plastic
End Cap
Screw Holes