User Manual

12
3. Flip the Universal Plates (C) and place them next to one
another with the Plastic End Caps facing the outside edges
and the Screw Holes facing up.
4. Slide two Fixing Plates (N) into the grooves of the Universal
Plates (C), located underneath the Screw Holes. Align the
Screw Holes in the Universal Plates (C) with the Holes in
the Fixing Plates (N).
5. Insert four M6 x 14 mm Screws (W) through the Screw
Holes in the Universal Plates (C) and into the Fixing Plates
(N).
6. Tighten all four M6 x 14 mm Screws (W), using a Phillips
Head Screwdriver.
Attach the Universal Plates (C) to the Columns (E+F)
1. Place the Universal Plate Assembly (C+J) atop the Left and
Right Columns (E+F) and align the four screw holes in the
Connectors (J) with the two screw holes in each Column
(E+F). (Figure 7)
2. Insert four M6 x 14 mm Screws (W) through the Universal
Plates (C) and into the Columns (E+F) (two for each
Column (E+F)).
3. Tighten all four M6 x 14 mm Screws (W), using a Phillips
Head Screwdriver.
Figure 7