User Manual

14
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
3. Hold one of the Knobs (P) up against the outermost hole
in the Support Bar (O) and insert one of the M6 x 25 mm
Button Head Screws (Y) through the square shaped hole in
the Media Shelf (K), the Support Bar (O), and into the Knob
(P).
4. Tighten the Knob, by hand.
5. Repeat steps 3-4 to attach the second Knob.
6. Insert two M6 x 14 mm Screws (W) through the innermost
circular shaped holes in the Media Shelf (K) and into the
Support Bar (O).
7. Tighten the M6 x 14 mm Screws (W), using a Phillips Head
Screwdriver.
Attach the Media Shelf (K) to the Columns
Figure 10