Installation Guide

AirStrand 1300 Installation Guide
DUG01370-SP Airspan Commercial and Internal Use 20
4 Installation of AirStrand 1300
AirStrand 1300 is installed on the strand (the steel cable) that runs from pole to pole supporting other
cables, such as telephone and cable company cables that run from pole to pole.
When mounting the AirStrand 1300 on a cable strand, you must use the Strand mount accessory kit.
The kit contains several parts that you should assemble before mounting on a cable strand. The Strand
Accessory kit contains the strand bracket(s) and the hanger bracket(s) (clamps) with the required
hardware (included) required for installation.
To install AirStrand 1300 to a cable strand, you need to perform these operations:
 Assemble strand hanger brackets.
 Attach the strand hanger brackets to the AirStrand 1300 unit.
 Attach the hanger bracket clamps to the cable strand.
 Connect interface (5/8” Interface connector type) to the cable infrastructure.
4.1 Strand Mounting of AirStrand 1300
Caution: Proper local rigging and hoisting practices should be followed when installing the AirStrand
1300.
Caution: The AirStrand 1300 is intended to be strand mounted in the telecommunications space
between poles, not in the electrical space.