Installation Guide

AirStrand 1300 Installation Guide
DUG01370-SP Airspan Commercial and Internal Use 22
2. Assemble both strand brackets to the top of the unit. Inserting the 5/16”-18 bolts (provided)
into the threaded holes.
Note: Assemble the brackets in the direction as shown in Figure 6 below.
Figure 6: Hanger Bracket Assembly on Unit
3. After assembly tighten down the bolts.
4. Orient the AirStrand 1300 to enable optimal positioning prior to placing on strand cable.
5. Lift assembled unit into place on the cable strand.
Figure 7: Unit on Cable Strand