Installation Guide

AirStrand 1300 Installation Guide
DUG01370-SP Airspan Commercial and Internal Use 31
B Installation Checklist
During installation, review and perform all the steps on this checklist (in the given order). This checklist
is meant for the person who performs the AirStrand 1300 installation. It includes the high–level steps
involved in the installation process.
Tip: To make sure you complete all the tasks, detach or print this checklist and use it as
a job aid. After performing, check off each task.
Procedure
Action
Check If Performed
Verify the prerequisites
Verify site requirements.
☐
Verify safety requirements.
☐
Verify installation requirements.
☐
Assemble the strand
bracket onto the unit
Assemble the strand bracket on the
AirStrand 1300 unit.
☐
Install AirStrand 1300 on
the cable strand
Fit and secure the AirStrand 1300 unit to
the strand cable.
☐
Adjust the GPS bracket
Extend the GPS bracket as required
☐
Connect to Infrastructure
Connect the CATV cable to the factory
installed Connector
☐