e l i t e video doorbell Owner’s Manual
Introduction Table of Contents INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 SETUP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7 HOW TO USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11 CARE AND CLEANING. . . . . . . . . . . . . . . . . . . . . . . . . . 11 FAQS. . . . . . . . . . . . . . . . . . . . .
Introduction Specifications Power Requirements: 16 VAC/10 VA Transformer Video Quality: Resolution: Hi (Default) = 1280x720 (720p), Med = 640x360, Low = 320x180 Frame Rate: Adjustable up to 25 Fps Viewing Angle: 160° Maximum Recording Length: 1 minute per recording Operating Temperature: -13 to +120°F (-25°C to +50C) NOTICE: Install the Notifi Elite doorbell in a covered location; away from direct sunlight, rain, and humidity.
Introduction Carton Inventory Microphone Notifi Elite Doorbell Camera Power Module Motion Sensor Speaker Push Button Spade Connectors (Connect to chime terminals) LED Indicator Ring Chime Wires (Connect to existing chime wires) All activities are monitored & recorded by video camera Screws (#6 x 3/4"), Wall Anchors, and Double-Sided Tape (for Power Module) Window Cling Decal Wire Quick Connect (x2) NOTICE Install the Notifi Elite doorbell in a covered location; away from direct sunlight, rain, an
Setup 1 Install the Notifi Elite Doorbell NOTICE Before connecting the Notifi Elite doorbell to a multi-tune electronic chime (see illustration on bottom of page 6), set the chime to the desired tune. See chime manual for tune selection instructions. NOTE: The Notifi Elite doorbell requires a 16 volt AC, 10 watt or higher transformer. 1. Remove the existing wired push button. 2. Remove the backplate of the Notifi Elite doorbell by pushing in tab on the bottom with a small, flat-head screwdriver. 3.
Setup 2 Install the Power Module The Notifi Elite doorbell requires a power module to be installed for each Notifi Elite doorbell connected to your chime. 1. Remove the chime cover from the existing chime. 2. Label the chime wires according to the terminals they are attached to (TRANS, FRONT, REAR). 3. Remove the transformer (TRANS) wire and connect it to one of the wires on the power module using the wire quick connect (included).
Setup 3 Download the Notifi App ! iOS Devices Go to the App StoreSM and search for the “Notifi Connected Products” app and download. Android Devices Go to the Google Play™ store and search for the “Notifi Connected Products” app and download. 4 Setup the Notifi App and Camera IMPORTANT: Your home password will be required during this process. 1. Allow the Notifi Elite doorbell 1 minute to fully boot-up. 2. On your mobile device, go to Settings > Wi-Fi.
How to Use Systems Tab The Systems tab is the “home screen” for all of your Notifi systems. From here you can access the following choices: • Notifi systems – The Systems tab lists all Notifi systems available. Tap on the desired Notifi system to view a live camera view. • • • mute unmute – Selecting the “Mute” button will immediately mute your chime. Muting the chime from this location will override any scheduled mute settings. Select “Unmute” to return to the scheduled mute settings.
How to Use Events An event is created when the push button is pressed. Two pictures from the Notifi camera will be stored to the cloud for 24 hours. With the Premium Service, when the push button is pressed two pictures and a video from the Notifi camera will be stored to the cloud for 30 days. Also with Premium Service, two pictures and a video event will be stored for 30 days with every motion trigger. Events tab. Then tap the name of the Notifi system you would like to view events for.
Events Back How to Use View Live Feed Notification Settings > Feature Settings > Notifications The notifications settings screen allows you to enable, schedule, and disable push notifications and email notifications. IMPORTANT: With any setting changes make sure you press the Save button your changes. Save in the upper right corner if you want to keep Mute Settings > Feature Settings > Mute Settings The Notifi system allows you to mute your chime from within the Notifi app.
How to Use Events Back System Name/Photo Icon View Live Feed > Advanced Settings > System Name/Photo The Notifi systems on your account can be renamed at any time. A photo can be added to represent each Notifi system on your mobile device. The photo will be placed next to the selected Notifi system. NOTE: The photo is stored on the Notifi server and will appear on any device logged into or sharing this account. IMPORTANT: With any setting changes make sure you press the Save button your changes.
How to Use Factory Reset > Advanced Settings > Factory Reset This selection will reset the Notifi Elite doorbell back to the original factory setting. NOTE: Once the Notifi Elite has been factory reset, the Notifi Elite doorbell can be used on a different account. NOTICE When resetting the Notifi Elite doorbell: • The Notifi Elite doorbell will be reset to factory settings and will no longer be connected to your Wi-Fi or the Notifi app. • All events (photos/videos) will be deleted from your account.
FAQs WHY CAN I NOT VIEW THE LIVE-STREAM VIDEO? • Verify that the Notifi Elite doorbell is ONLINE. If it is online, the Notifi Elite doorbell’s name will be blue within the app and the LED halo on the push button will glow blue. If it is offline, the Notifi Elite doorbell’s name will be gray within the app and the LED halo on the push button will flash blue. • Live-stream video can only be viewed by one user at a time.
FAQs WHY DOES MY CHIME NOT RING WHEN I PRESS THE PUSH BUTTON? • Ensure that the power is turned on to the transformer. NOTE: The LED halo around the push button will glow blue. • Ensure the chime selection is set to the correct chime type, either mechanical or electronic ( Chime Selection). > Advanced Settings > • Ensure the tune duration matches the length of the tune selected, if connecting to an electronic chime ( Settings > Chime Selection).
1 Year Limited Warranty This is a “Limited Warranty” which gives you specific legal rights. You may also have other rights which vary from state to state or province to province. For a period of one year from the date of purchase, any malfunction caused by factory defective parts or workmanship will be corrected at no charge to you. Not Covered - Repair service, adjustment and calibration due to misuse, abuse or negligence, batteries, and other expendable items are not covered by this warranty.
