Owner's Manual

DN-60974:C • 3/5/19 — Page 1 of 2
NCD
NCD Network Control Display
General
The Network Control Display (NCD) is the next generation of net-
work control annunciators for the NOTI•FIRE•NET™ network. With
a new modern contemporary design, the NCD meets todays build-
ing aesthetic needs. The intuitive 1024 x 600 10” color touch
screen provides color coded information of detailed system status
and point information. It is compatible with ONYX Series nodes
such as the NFS2-3030, NFS-320, and NFS2-640 fire alarm con-
trol panels, as well as the NCA-2. The NCD provides system con-
trol and display capabilities for all, or for selected network nodes.
Additionally in a standalone configurations, the NCD can be used
as the primary display for control and status capabilities on display-
less node by utilizing Direct Connect.
When connected to one or more networked panels, the NCD pro-
vides network control and status/history display capabilities.
Hardware Features
• Full supervision of all inputs and network integrity.
• High definition 10” 1024 x 600 color touchscreen display.
• LED status indicators
• Requires 24 VDC, and a network connection or direct connect.
• Three USB 2.0 connections, USB C, USB Micro, and USB A.
• Trouble Relay.
• Tamper and Trouble inputs.
Function Features
• Device information, including point address and description, can
be quickly identified.
• Network-wide: Acknowledge, Silence, Reset.
•Lamp Test.
• Interactive Summary Event Count display and event handling.
• Intuitive user guidance program.
• Fully programmable node-mapping subsystem.
• Environmental adjustment controls to maximize display legibility.
• Color coded Icon based event notification.
• Can be used as FACP primary display.
• Supports standard and high speed network systems.
• Event vectoring for quick viewing of event groups.
• Virtual alphanumeric QWERTY keypad and numeric keypad dis-
plays when data input is needed.
• Individual Enable/Disable or group Enable/Disable for networked
ONYX series panels.
• Control ON/OFF for networked ONYX series panel control points.
• Read Status networked ONYX series panel points and zones.
• History Buffer (10,000 events, 3000 displayed).
• Up to 50 unique users and 5 different user levels.
• Read Status from event display.
• History filters for report displaying.
• Timer control for Auto Silence, AC Fail Delay.
• Custom wallpaper
NCD Indicators and Controls
LED INDICATORS
Green LED illuminates when 24 VDC power is applied; When on
battery backup, the green LED will not illuminate.
Yellow LED illuminates when an off normal condition exists.
VIRTUAL EVENT INDICATORS
• FIRE ALARM (red) illuminates when at least one fire alarm event
exists.
• CO Alarm (blue) illuminates when at least one CO alarm event
exists.
• SUPERVISORY (yellow) illuminates when at least one supervi-
sory event exists (i.e., sprinkler valve off normal, low pressure,
fire pump running, guard’s tour, etc.).
• TROUBLE (yellow) illuminates when at least one trouble event
exists.
• POINT DISABLED (yellow) illuminates when at least one disable
exists on the network or in the system.
• OTHER (varies) illuminates for SECURITY, PRE-ALARM, CO
PRE-ALARM, and CRITICAL PROCESS.
• SIGNALS SILENCED (yellow) illuminates if the NCD Silence
touch point has been pressed or if any other node sent a Network
Silence command.
firealarmresources.com