User's Manual

Need help?
Call us at [phone]
Email us at [e-mail]
Tweet us @notion
Box may contain equipment pertaining to:
FCC ID: 2AE5C-5280-S1 and IC: 20391-5280S1 | FCC ID: 2AE5C-5280-B1 and IC: 20391-5280B1
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the
receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the
dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment complies with FCC and IC RF (Radio Frequency) exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum separation
distance of 20 centimeters between the device/antenna and the user’s head/body.
Caution: Changes or modifi cations not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas
produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
CAN ICES-3 (B)/NMB-3(B)
In order to comply with the maximum permissible exposure (MPE) limit for radio frequency (RF) energy allowed by both the FCC and IC, the bridge must be placed no closer than 20 cm to the operator
during normal operatione placed no closer than 20 cm to the operator during normal operation
Afi n de se conformer à l’exposition tolérée (EMT) limite maximale pour la fréquence radio (RF) a permis à la fois par la FCC et IC , le pont doit être placé pas moins de 20 cm à l’opérateur pendant le
fonctionnement normal .