Installation Instructions

3.6 Finishing installation
3.6.1.1Check for mechanical integrity of the sensor unit
3.6.1.2Test for hermetic sealing integrity of all connectors: Rear panel,
DSRC Antenna connectors. Verify dust caps are locked in place
4 System Startup
4.1.1.1Turn on should be done only by NoTraffic’s team and only after
verifying proper installation of all components.
4.1.1.2The traffic controller must be placed in free mode, fully-actuated, in
order for the NoTraffic platform to operate in adaptive mode. In the
case of any failure the backup timer will be configured to revert to
TOD/Coordinated control. All signal switching is managed by the
traffic controller and protected by the conflict monitor.
10