Installation Instructions

5 FCC information

● FCC ID labels can be found on the SU and CU enclosures.

All RF modules could be accessed by disassembling the products

enclosure

Certification process: FCC ID:

2AS3G-CONT - Control unit

2AS3G-SENS - Sensor unit

Products contains the following RF modules:

CTM process: Contains FCC ID:

TV7R11E5HACD ; VOB-P3310

;

QISME909U-52



(Control unit)

VOB-P3310 ; 2AEGPMK5OBU



(Sensor Unit)

- To comply with FCC, Installation must be done according to the

instructions in this manual.

Class A - Industrial use

The FCC Wants You to Know

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference,

in which case the user will be required to correct the interference at his own expense.

Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.