Installation Instructions

1 System overview
A typical NoTraffic installation consists of one sensor unit (SU) for each
intersection approach (typically 4) and one control unit (CU) installed inside
the cabinet and connected to the traffic controller.
The SUs gather and process data about traffic demand and send
processed data to the control unit which runs optimization algorithms that
intelligently place calls to the traffic controller.
The CU receives data from connected vehicles, other intersections on the
grid, and the web-based user interface tools and integrates this information
into optimization decisions.
The platform monitors the proper functioning of the traffic controller and will
provide real-time alerts in case it detects any problems with the traffic
controller (such signal flashing mode, stuck pedestrian calls, cabinet
communication errors, etc).
SU:
2