Product Manual
474 Ergo Mat™
Anti-Fatigue/Anti-Slip Matting
Ergo Mat™ has a corrugated ribbed top surface of
resilient SBR rubber that provides directional traction
to reduce slips, and offers superior anti-fatigue support
for applications where workers are required to stand
for long periods of time. The top surface is combined
with a dense closed cell foam base utilizing NoTrax®
exclusive UniFusion™ technology virtually eliminating
the possibility of de-lamination.
Available Colors: Black
• Utilizes NoTrax
®
exclusive UniFusion™ bond
• Durable SBR Rubber top surface
• Dense closed cell PVC foam base
• T
op surf
ace easy to sweep clean
• Overall thickness: 1/2”
• Al
l four sides are beveled to minimize trip hazards
• Stock Sizes: 2’ x 3’, 3’ x 5’, 3’ x 12’
• Roll Sizes: 2’ x 75’, 3’ x 75’, 4’ x 75’
• Custom siz
es a
v
ai
lable in 2’
, 3’, and 4’ widths
Test Test Description
*Results
Compression Deflection
A neolite heel assembly with a predetermined load is pulled horizontally
with a dynamometer to measure the force required to cause the
assembly to slip.
.183” (40 lbs/sq. inch)
Coefficient of Friction
ASTM C1028-96
Test specimen is subjected to varying compression load levels and the
resulting deflection was measured. The greater the deflection, the better
the anti-fatigue properties. (Inches)
.75
Abrasion Resistance
ASTM D3884-01
Test specimen is subjected to the rubbing action of two abrading
wheels under controlled conditions.
Results measured in Weight loss (Grams)
6.05 Grams
Elongation
A
STM D412
Test specimen is stretched at a specified rate until breaking point. The
results are measured in weight needed to break, and % of size increase
at breaking point.
(data currently unavailable)
Tear Strength
A
STM D1004
This test is designed to measure the force required to initiate tearing.
The maximum str
ess, usual
ly found near the outset of tearing, is record-
ed as the tear resistance in pounds (force)
(data currently unavailable)
Hardness
A
STM D2240
The hardness of a test sample is measured by means of a type A Shore
Dur
ometer
. The Durometer measures the penetration of its specified
indentor forced into the test material under specified conditions
(data currently unavailable)
Critical Radiant Flux
ASTM E648-94A
The test result is an average critical radiant flux (watts/square cm) which
indicates the lev
el of radiant heat energy required to sustain flame pro-
pogation in the flooring system.
(data curr
ently unavailable)
Good Better
B
B
BB
e
e
ee
s
s
ss
t
t
tt
Superior
Welding
Anti-Slip
outdoor anti-slip
anti-fatigue
welding
food service
custom
drainage
food processing
non-conductive
logo
anti-static
outdoor anti-slip
anti-fatigue
welding
food service
custom
drainage
food processing
non-conductive
logo
anti-static
Custom Lengths
Anti-F
atigue
outdoor anti-slip
anti-fatigue
welding
food service
custom
drainage
food processing
non-conductive
logo
anti-static
outdoor anti-slip
anti-fatigue
welding
food service
custom
drainage
food processing
non-conductive
logo
anti-static
*All testing of NoTrax
®
floor matting has been performed by an independent testing laboratory.