Specification

BASIC INFORMATION ON QUALITIES
QUALITY NAME: MAXELL
PILE:
A- Material and Percentages: (i.e. 100% Wool; 80%wool 20% polyester; etc.) polyester filament
B- Count & Plies (i.e. 8.5CC 3Ply; or 1800 denier,10 ends,etc.) 1500*2 DTEX
C- Origin: (i.e. 100% New Zealand, 50%NZ,50%China; etc.) China
D- No. and Type of twist (i.e. 280/m , S/Z; etc) 150/m,S
E- Pile height (i.e. 10mm; 0.41inches,etc.) 10mm
F- Pile weight (i.e. 2.5 Kg/M2 ; etc.)
1.6kg/㎡
G- Dye Method: (i.e. Solution Dyed; Space Dyed; Hank; Skein; Piece; etc.) colored spun yarn
H- Heat Set (if any) yes
I- Kind of Dyes used (i.e. Acid Dyes; Reactive Dyes; Complex Metal Dyes, etc,) color master batch
Weft and Warp:
A- Material and Percentages: (i.e. 100% Wool; 80%wool 20% polyester; etc.) weft is 100% Jute,warp is 100% PET
B- Count & Plies (i.e. 8.5CC 3Ply; or 1800 denier,10 ends,etc.) weft:2.5s/1, warp:20s/3
C- Origin: (i.e. 100% New Zealand, 50%NZ,50%China; etc.) China
D- No. and Type of twist (i.e. 280/m , S/Z; etc) weft 180/m,S; warp:180/m,S
E- Weight
weft:0.36kg/㎡,warp:0.14kg/㎡
Backing:
A- Material (i.e. Cotton, Jute, Latex; etc.) weft+warp+latex+pile yarn
B- Weight (i.e. KG/M2)
0.8kg/㎡
Construction:
A- Kind: (i.e. Woven; Tufted; Knotted; etc.) woven
B- Appearance (i.e. Flat, Carved, Sculptured; Plush; etc.) cut
C- Rows (stitches or Knots per 10 linear Centimeters) 450/m
D- Pitch (stitches or knots per 10 vertical Centimeters) 324/m
E- Total Weight (i.e. Kg/M2)
2.4kg/㎡
Finishing:
A- Treatments (i.e. any Mothproofing, stein resistant agents, etc. ) No special treatments
B- Kind and Stage ( if any treatments, specify at what stage,
i.e. at dye stage, application on finished product, etc; as well
as the material used i.e. 3M fc, or Bayer Mothproof xxx, etc.)
C- Method: If any treatments, specify the method of
application( in Dye solutions, in raw material chips, sprayed
on final product, etc.)